MultiPort/LT Guide

Installation Requirements

The MultiPort/LT is normally placed on a user-provided shelf within the networking closet: there is no rack mounting hardware provided. Required shelf space is 2.4 inches (61mm) high, 9.6 inches (244mm) wide and 11.5 inches (292mm) deep including connector space. In addition, a 1-inch (25mm) space must be left clear on the left side for air circulation.

In North America, the included 2.3 x 2.8 x 3.5 inch (58x71x89mm) line transformer is equipped with an 8-foot (2.4m) output cable supplying 18-volt power to the MultiPort/LT, and a 6-foot (1.8m)120-volt power cable.

In Europe and Australia, the included 2.8 x 3 x 4.8 inch (71x76x122mm) line transformer is equipped with an 8-foot (2.4m) output cable supplying 18-volt power to the MultiPort/LT, and a standard computer IEC socket to accept a user-supplied country specific 240-volt power cable.

Rear Panel Connections

For connection to your corporate network backbone, MultiPort/LT comes ready equipped with three Ethernet standards: DB15 AUI (10Base5), BNC (10Base2), and RJ45 twisted pair (10BaseT). While only one connection may be active at a time, the choice provides you installation flexibility without need for external adapters.

Four standard MD8 Apple serial ports may be flexibly assigned as LocalTalk network connections, or as modem or ISDN System Adapter connections in any combination. A fifth MD8 connector is provided for connection to a console terminal, for maintenance purposes.

A mating power connector accepts the 18-volt cable from the supplied line transformer.

Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | Next

Home | Products | Support | Customers | About Webster | How to Buy
Last updated March 21, 2005
Copyright © 1993-2005 Webster Computer Corporation. All Rights Reserved.